|
Moisture survey
Microscopy on site
|
Mould Inspections
in The Greater Vancouver
Area
Bio-D-Tec Mould Experts is committed to providing our customers with the most thorough inspection service available in the Vancouver,B.C.area and North Coast BC.
We provide you with more than just an air-sample, we solve the problem.
Compare our services:
- On-Site Testing, with Microscopy - SAME DAY REPORTS
- Multiple tape samples taken from the house (average 15-18 samples)
- Moisture survey
for water intrusion and water damage included
- Air-samples, if required, analyzed by a 3rd party independent certified laboratory
- Detailed, written scope of work provided
- Full consultation services provided by a team of engineers and scientists
- Individual advice and recommendations
- Written reports and detailed
explanations of the mould remediation required
- Written quotations for remediation
Our inventory of mould inspection equipment:
- Digital Microscope - for immediate confirmation of suspected contamination
- Digital camera - full documentation of inspection
- Air sampling equipment - to test for interior and exterior mould spore counts
- Air Particulate counter
- Bulk Tape sampling supplies - to confirm, using microscopy, areas of spore amplification, especially in areas
where visual confirmation is not practical or accessible
- Bulk Swabs - for petri dish
cultivation
- Lighting
equipment
- Moisture meter- to identify
wet or problematic areas, on the surface and behind walls - we include a full moisture survey in the mold consultation report
- Relative Humidity monitors/
thermometers- to assess humidity levels and temperature in various areas of
the house, to measure HVAC and ventilation efficiency
- Full personal protective
equipment (PPE) - full and half face masks-respirators, gloves, protective clothing,
goggles (OSHA standards)
- Equipment for invasive inspections - to remove small sections of drywall ( not required for every mould inspection).
Mould Inspection and Consultation - costs and hours
- A full mould inspection on an
average size residential house ( approx. 1500 - 3000 sq feet) will take between 2
to 5 hours. The mould inspection will include a thorough visual inspection of the attic, basement and /or crawlspace, HVAC systems, garage and interior sections of the house as well as the exterior landscape.
- Samples will be taken for microscopic analysis, not only on the site of visible mould, but throughout the house to establish levels of cross contamination within your home. In addition to sampling the customer's complaint area and areas with visible mould, we also take at least one sample from each room, plus additional samples from storage areas, attics and crawlspaces. On average, we take approx. 15 samples in 2000 sq.ft. home.
- In most circumstances, a full written report is completed on site, no waiting for test results.
- We then have a full report review with our Quality Engineer and our certified remediators and Environmental Scientists. Your project is discussed in detail, to ensure that we are giving you professional and accurate advise.
- The cost for this full service residential inspection starts at $450.00. Pricing is based a one time visit to the residence, on the size of the home and not the number of samples taken.
|
Vancouver and Lower Mainland
Prices include samples
|
|
|
Apartments and condos under 1500 sq ft
|
$450.00
|
|
Basement suite - for tenants only
|
$450.00
|
|
Duplexes -Townhomes - cottages < 1500 sq ft
|
$450.00
|
|
Residential houses 1500 to 2000 sq feet
|
$500.00
|
|
Residential 2000 to 3000 sq feet
|
$550.00
|
|
Residential 3000 to 4000 sq feet
|
$650.00
|
|
Residential > 4000 sq feet
|
$750.00 +
|
|
Commercial buildings
|
start at $650.00
|
|
Yachts under 45 ft
|
$550.00
|
|
Yachts 46 to 85 ft
|
$650.00
|
- Additional charges for travel will be applied to areas east of Langley, Whistler and Sunshine Coast.
- If 3rd
party certified lab reports are required, or there are additional requirements, the cost
of these can be determined at the time of making an appointment. This cost is based on the number of samples required. The minimum number of air samples required is two. These are costed out at $100.00 per sample.
How do we make
an appointment for a mould inspection ?
For the Vancouver area -
- Telephone: (778) 786-1552
- Office hours: Monday to Friday 9AM - 7PM
Please
note that inspections are best conducted in daylight hours.
Servicing the following areas: The Greater Vancouver area, The Lower Mainland, Abbotsford, Burnaby, Chilliwack, Coquitlam, Delta, Hope, Langley, Maple Ridge, Mission, North Vancouver, Pemberton, Richmond, Smithers, Squamish, Stewart, Surrey, Terrace, West Vancouver, White Rock, Walnut Grove, Whistler
Bio-D-Tec Mould Experts - we offer full microbial
remediation services and testing and inspections for large and small mould
clean-ups. Guaranteed.
Licensed for Environmental
and Industrial Pollution Clean-up - Our team of Quality Engineers and Environmental Scientists are Certified Indoor Air Quality Specialists, Certified Mould Inspectors and Certified Microbial
Remediators, Certified Radon Measurement
[ TOP
]
|
